Samsung HT-HDP40 - Manual (Page 11)

Connecting External Components
I Connecting an External Digital Component
Example; Digital signal components such as a Settop Box or CD Recorder.
(o^)
I
S.liXSKAMRSOUT
(IMPEDANCE 3a) _
' H i I 1
U ,
a
f... .......... )
' caMraNEMT
•__ OUT • ■
actTAuist VIDEO OUT
OPTICAL
0
S-UIDEO
Optical Cable
(not supplied)
External Digital
Component
0 o
TV
“I Connect Video Out on the Honne Theater to Video In on the TV
2
Connect Video In on the Honne Theater to Video Out on the external digital component.
3
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
4 Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: HDMl 1N~» DIGITAL IN-* AUX 1 AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD HDMI IN DIGITAL IN AUX 1 AUX 2 FM AM.
I Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Connect Video Out on the Home Theater to
Video In on your TV.
2
Connect Video In on the Home Theater to
Video Out on the external analog component.
3 Connect Audio In on the Home Theater to Audio
Out on the external analog component.
* Be sure to match connector colors.
4 Press AUX on the remote control to select AUX 1
or AUX 2 input.
* Each time the button is pressed, the selection changes as
follows: HDMI IN~* DIGITAL IN~> AUX 1 AUX 2.
* You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ~+ HDMI IN -*
DIGITAL IN AUX 1 AUX 2 FM AM.
O
o
o
O
CO
If you have connected an external digital
component and also an Analog
component to Video In (1,2} at the same
time, there will be video from AUX 1 even
when you select DIGITAL IN.
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.