Samsung HT-HDP40 - Manual (Page 29)

Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Sotting the DRC
(Dynamic Range Compression)
S
You can use this function to enjoy Dolby Digital sound when watohing movies at low volume at night.
1
In Stop or no
disc mode,
press MENU
button.
2
Press Cursor ▼
button to move to
‘Audio’ and then
press ENTER button.
Iff
Pres» CfliSf fey
i«f his-o Wsna
3
Press Cursor i
to move to TEST ; ; :
TONE’ andthen press
ENTER button. : ;
' The test tone will be sent to L C
R SR “+ SL SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
I Alternate method: press the TEST TONE button on the remote
Press TEST TONE button. ...........................................
• Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
• Use this function to check that each speaker is correctly
connected and that there is no problem.
• When there is no input signal from the HDIVII IN function, the
Test Tone will not work.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Multi-Channel Pro Logic Mode
o e o
start
1
In Stop or no disc
mode, press
MENU button.
3 Press Cursor ▼
button to move to
DRC and then
press ENTER
button.
2 Press Cursor t
button to move to
Audio' and then
press ENTER
button.
A
4
4
Press Cursor
A to adjust
the DRC.
' When the Cursor* button is pressed,
the effect is greater, and when the
Cursor ▼ button is pressed, the effect is
smalier.
Press RETURN button to return to the previous level.
P i ess MENU button to exit the setup screen.
m
H
c
TJ