Samsung HT-HDP40 - Manual (Page 27)

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
DVD Audio Disc Playback Mode
1 Press the MENU
button while the
disc tray is open.
2
Press Cursor ▼
button to move to
'Setup’ and then
ENTER
ii
3
Press Cursor ▼
button to move to
‘DVD TYPE’ and then
press ENTER button.
DVD Play mode is set to DVD Audio
as factory default setting.
DivX (R) registration
4
Press Cursor A, ▼
button to move to
‘DVD VIDEO’ and then
press ENTER button.
Set steps 1 - 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
contents contained on a
DVD audio disc.
• DVD AUDIO : set to play the default
DVD audio.
Please use the Registration code to register this player
with the DivX (R) video on demand format. To learn more,
go to www.divx.com/vod.
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Setting the Speaker Mode
1
In Stopmode,
press MENU
button. ■ V
2
Press Cursor ▼
button to move to
‘Audio’ and then
press ENTER button.
3 In the Speaker
Setup, press the
ENTER button again.
4
Press Cursor a , ▼,
◄ , ► buttons to move
to the desired
speaker and then
press ENTER button.
• For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL -> NONE.
• For L and R, the mode is set to SMALL.
cr>
C/3
m
H
c
■D
small ie =c: this when using the speakers.
NONE S: :c; this when no speakers are connected.
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 61).