Sony SPP-SS955 - Manual (Page 17)

To turn the ringer off
Set the RING switch on the bottom to OFF.
You can save battery power.
The handset won't ring. You can still make calls,
and also receive calls if another telephone
connected to the same line rings to inform you on
incoming calls, but you cannot receive an
intercom call.
Receiving calls through the speakerphone
When you hear the phone ring, press
(SPEAKERPHONE ) on the base phone.
The LINE lamp lights up.
When you're done talking; press
(SPEAKERPHONE ) again.
To obtain the best speakerphone
performance, see page 14.
00
(U
n‘
(A
LINE lamp
SPEAKER VOLUME control
Additional tasks
RINGER switch
To Do this
Put a call on hold Press ( HOLD). The LINh lamp flashes.
Press (HOLD) again to resume the conversation.
Switch to another call
("call waiting" service*^)
Press ( FLASH).
Press ( FLASH) again to return to the first caller.
Adjust the speakerphone
volume. Slide the SPEAKER VOLUME control.
Turn on/off the ringer of
the base phone Set the RINGER switch on the base phone to ON to
turn the ringer on, or OFF to turn it off
• You need to subscribe to this service from your telephone company.
Note
Even when you set the RINGER switch on the base phone to OFF, the handset
will ring when the RING switch on the handset is set to ON.
Tips
• To inform you of an incomings call, the LINE lamp lights on and off according
to the ring signal even when you set the RINGER switch on the base phone to
OFF.
• If there is an incoming call while on the intercom, the base phone will ring
even when the RINGER switch on the base phone is set to OFF.
Basics
17™