Cd player section, Tape player section, Tuner section – Sony LBT-LX50 User Manual
Page 50: Speakers, Ss-lx50 for lbt-lx50/lx30, Ss-lx8g*or lx8 for lbt-lx8, Ss-lx7 for lbt-lx7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications (continued)
CD player section
System
Laser
Laser output
Wavelength
Frequency Response
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUT
(square optical connector
Wave length;
Output level:
Compact disc and digital
audio system
Semiconductor laser
(k
= 780 nm). Emission
duration: continuous
Max. 44.6 pW*
* This output is the value
measured at a
distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 - 790 nm
2 Hz - 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
jack, rear panel)
660 nm
-18 dBm
Tape player section
Recording system
4-track 2-channel stereo
Frequency Response (DOLBY NR OFF)
40 - 13,000 Hz (±3 dB),
using a Sony TYPE 1
cassette
40 -14,000 Hz (±3 dB),
using a Sony TYPE II
cassette
±0.15 % W.Peak (lEC)
0.1 % W.RMS (NAB)
±0.2 % W.Peak (DIN)
Wow and flutter
Tuner section
FM Stereo, FM/AM superheterodyne tuner
FM tuner section
Timing range
North American models:
Other models;
Antenna
Antenna terminals
Intermediate frequency
87.5 -108.0 MHz (100
kHz step)
87.5 - 108.0 MHz (50kHz
step)
FM Wire antenna
75 ohm unbalanced
10.7 MHz
AM tuner section
Tuning range
Pan-American models:
European and Middle
Eastern models:
Other models:
Antenna
Intermediate frequency
530 -1,710 kHz (with the
tuning interval set at 10
kHz)
531 - 1,710 kHz (with the
tuning interval set at 9
kHz)
531 - 1,602 kHz(with the
tuning interv'al set at 9
kHz)
531 -1,602 kHz (with the
tuning interval set at 9
kHz)
530 -1,710 kHz (with the
tuning interval set at 10
kHz)
AM loop antenna.
External antenna
terminals
450 kHz
Speakers
SS-LX50 for LBT-LX50/LX30
3-way BUILT IN SW
Speaker System
Speaker units
Woofer;
Tweeter;
Rated impedance:
Dimensions(w/h/d)
Mass
17 cm dia., cone type
2.5 cm dia., horn type
6 ohms
Approx.
255 X 530 x 325
mm
Approx. 10 kg net per
speaker
SS-LX8G*or LX8 for LBT-LX8
Speaker System
Speaker units
Super Woofer:
Tweeter;
Rated impedance:
Dimensions(w/h/d)
Mass
3-way BUILT IN SW,
Magnetically shielded
type
20 cm dia., cone type
2.5 cm dia., horn type
4 ohms
Approx. 290
X
615
X
435
mm
Approx. 16 kg net per
speaker
For LBT-LX8 (Middle Eastern, Australian, and
New Zealand models) only.
SS-LX7 for LBT-LX7
Speaker System
Speaker units
Super Woofer;
Tweeter:
Rated impedance;
Dimensions(w/h/d)
Mass
50
3-way BUILT IN SW,
Magnetically shielded
type
20 cm dia., cone type
2.5 cm dia., horn type
6 ohms
Approx. 290
X
615
X
435
mm
Approx. 16 kg net per
speaker