Sony LBT-LX50 - Manual (Page 49)

Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels driven, from
120 -10,000 Hz; rated 140 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion.
Amplifier section
(LBT-LX50 (Canadian model only))
Continuous RMS power output (Reference)
160 + 160 watts
(6 ohms at 1 kHz, 10 %
THD)
Total harmonics distortion
Less than 0.07 %
(6 ohms at 1 kHz, 70 w)
(LBT-LX8)
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
240 + 240 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
300 + 300 watts
(4 ohms at 1 kHz, 10 %
THD)
(LBT-LX6)
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
150 + 150 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
200 + 200 watts
(6 ohms at 1 kHz, 10 %
THD)
(LBT-LX7)
DIN power output (Rated)
200 + 200 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
250 + 250 watts
(6 ohms at 1 kHz, 10 %
THD)
Music power output (Reference)
430 + 430 watts
(6 ohms at IkHz, 10 %
THD)
(LBT-LX5)
DIN power output (Rated)
110 +110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
140 + 140 watts
(6 ohms at IkHz, 10 %
THD)
Music power output (Reference)
240 + 240 watts
(6 ohms at 1 kHz, 10 %
THD)
Inputs
DJ MIX IN *(phono jacks):
GUITAR IN (phone jack):
PHONO IN (phono jacks):
MIX MIC (phono jack):
VIDEO 1 IN (phono jacks)
VIDEO 2 IN (phono jacks)
MD IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 75 mV,
impedance 470 kilohms
sensitivity 3 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
:sensitivity 250 mV,
impedance 47 kilohms
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 450 mV,
impedance 47 kilohms
Outputs
DJ MIX OUT »(phono jacks):
sensitivity 250 mV,
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
VIDEO OUT (phono jack): voltage 250 mV,
impedance 1 kilohm
MD OUT (phono jacks): voltage 250 mV,
impedance 1 kilohm
FRONT SPEAKER:
(LBT-LX8)
accepts impedance of 4 to
16 ohms
(LBT-LX7/LX6/LX5/LX50/LX30)
accepts impedance of 6 to
16 ohms
SURROUND SPEAKER (LBT-LX50 only ):
accepts impedance of 16
ohms
* European, North American, and Mexican
models only.
continued
49