Sony LBT-LX50 - Manual (Page 18)

Recording from a
tape
—
High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(Cr02) tapes. The recording level is
automatically adjusted.
1/6
(Power)
3
Press DIRECTION repeatedly until
appears to record on one side,
or (or RELAY) to record on
both sides.
4 Press II.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
To stop dubbing
Press ■ on deck A or B.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Notes
• If you set DIRECTION to when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You cannot record the surround effect.
Press A EJECT ± and ±B EJECT
and insert a recorded tape in deck A
and a recordable tape in deck B.
With the side you want to
play/record on facing forward
2
Press H SPEED DUB.
Deck B stands by for recording.
18