Note, Connecting surround speakers (lbt-lx50 only) – Sony LBT-LX50 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a mixer (for
European, North
American, and Mexican
models only)
You can connect a mixer to the DJ MIX jacks
on the rear panel of the unit.
To the outputs To the inputs
of the mixer
of the mixer
Connecting audio components
(continued)
1
Remove the jumpers from the unit.
2
Connect the SEND jack of the unit to the IN
jack of the mixer with an optional cable.
3
Connect the OUT jack of the mixer to the
RETURN jack of the unit with an optional
cable.
4
Press FUNCTION repeatedly until "CD"
appears.
You can also record the sound produced by
the mixer onto a tape.
Note
Replace the jumpers when the mixer is not in use.
Otherwise, no sound will come from the unit. Be
sure to connect the jumpers from the RETURN jack
to the SEND jack of the unit.
Two jumpers are preinstalled connecting the DJ MIX
RETURN and SEND jacks.
Connecting surround
speakers (LBT-LX50 only)
You can connect optional surround speakers.
Refer to the instructions included with your
surround speakers for details.
To surround
speaker(R)
To surround
speaker (L)
42
Note
You need to connect both left and right surround
speakers. Otherwise, the sound will not be heard.