Sony SPP-935 - Manual (Page 4)

may result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal operation.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
13. Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
14. Do not use the telephone to report a
gas leak in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
CAUTION:
To reduce the risk of fire or injury to persons by
battery, read and follow these instructions.
1. Use only the following type and size battery
pack Sony BP-T23.
2. Do not dispose of the batteries in a fire.
The cell may explode. Check with local codes
for possible special disposal instructions.
3. Do not open or mutilate the batteries.
Released electrolyte is cprrosive and may ^
cause damage to the eyes or skin. It may be
toxic if swallowed.
4. Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and keys-
The battery or conductor may overheat and
cause burns.
5. Charge the battery pack provided with or
identified for use with this product only in
accordance with the instructions and
limitations specified in the instruction manual
provided for this product.
6. Observe proper polarity orientation between
the battery pack and battery charger.
INFORMATION FOR
GENERAL TELEPHONES
1. This equipment complies with Part 68 of the
FCC rules. On the bottom of this equipment is
a label that contains, among other
information, the FCC registration number and
ringer equivalence number (REN) for this
equipment. If requested, this information
must be provided to the telephone company.
2. The applicable registration jack (connector)
USOC-RJllC is used for this equipment.
3- This equipment is designed to be connected to
the telephone netwi>rk or premises wiring
using a compatible modular ¡ack which is Part
68 compliant.
The FCC compliant telephone cord and
modular plug is pro\’ided with this
equipment.
,
4. The REN is used to determine the quantity of
devices which mnv be connected to the
telephone line. Excessive RENs on the
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0).To be certain of
the number of devices that mav be connected
to a line, as determined by the total RENs,
contact the local telephone company.
5. If your equipment (SPP-935) causes harm to
the telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service may be
required. But if advance notice is not practical,
the telephone company will notify the
customer as soon as possible. Also, you will
be advised of your right to file a complaint
with the FCC if vou believe it is necessary.
6. The telephone company mav make changes in
its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the telephone
company will pri>\'ide adx ance notice in order
for you to make necessar\’ modifications to
maintain uninterrupted sers’ice.
7. If trouble is experienced \\ ith this equipment
(SPP-935), for repair or warranty information,
please contact Sonv Direct Response Center;
Tel 1-800-222-/669. U the equipment is
causing harm to the teleplione network, the
telephone company may request that you
disconnect the equipment until the problem is
resolved.
8. All repairs will be performed in an authorized
—Sony service station.
9. This equipment cannot be used to party lines
or coin lines.
Ul.This equipment is hearing aid compatible.