Additional information, Mounting the base phone on a wall – Sony SPP-935 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Mounting the base phone on a wall
1
Remove the hang-up tab and
replace it upside down.
Attach the AC power adaptor
cord and the telephone line cord
to the wall bracket.
Hook the wall bracket to the
wall plate, and plug the
telephone line cord into the
telephone outlet.
If the wall plate is not available, use
the two screws provided to mount
the bracket.
-(XS— -fflUBiQ
If the wall bracket is unstable, tear
off the two protuberances at the
horizontal arrows (b/B) and insert
them to the lower comers of the
wall bracket, at the vertical arrows
(v).
Insert the upper tabs first, then
press down the base phone so
that the lower tabs on the
bracket go into the base phone.
Then, raise the antenna
vertically and attach the hang
up tab upside down.
>
a
a.
r*
o'
3
SL
3
0
3
Q)
o'
3
Additional Information 25^'