Storing phone numbers on the base phone, To store the previous number dialed – Sony SPP-935 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing phone numbers on the base phone
1 Press (PGM).
The SPEAKERPHONE lamp
flashes quickly.
2
Press one of the ten dialing keys
(Cq) to Cl}) for the phone
number to be stored.
You will hear a confirmation
beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press C SPEED DIAL).
You will hear another
confirmation beep, and the
number is stored.
Notes
In step 3, if you do not enter the phone number, the previously stored number will be
erased.
Do not allow more than 20 seconds to elapse between each step of the
procedure.
You cannot store phone numbers on the base phone while the handset is
being used. The IN USE lamp will light up to indicate this condition.
Tips
If you enter a vvrong number, press ( SPEE^DI
al
). then start from the
beginning.
Use the supplied directory to write down what you have stored on the speed dialing
numbers.
>
a
<
3
n
(0
a
*n
to
c
to
vs
To store the previous number dialed ^
Press (
REDIAL/PAUSE)
directly after step 2, then go to step 4.
continued
Advanced Features
17'“'