Sony GDM-400PS - Manual (Page 17)

Customizing Your Monitor
Using the LANG (Language) On­
screen Display
EngKsh, French, German, Spanish, Italian and Japanese
versiot« of the OSDs are available.
1 Press the MENU button.
The MENU 0SD appears.
2 Press the and buttons to select “ @
LANG," and press the MENU button again.
The LANGUAGE OSD appears.
b b
eCNOUaH .
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
3 Press the buttons to select the desired
language.
nzn
b
ENGLISH; English, FRANÇAIS: French,
DEUTSCH: German, ESPAÑOL; Spanish,
rrALIANO: Italian, or : Japanese.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset to English, press the RF.SET button while the OSD
is on. -
Resetting the Adjustments
1 Press the MENU. and O^-Z-^buttons to select
the OSD containing the item you want to reset.
a
Ofc] EZSZE!)
^ b b
2 Press the buttons to select the item you want
to reset.
1
b
3 Press the RESET button.
RESET
When there is no OSD displayed, press thé RESET
button.
All of the adjustments data for the current input signal is
reset to the factory settings.
Note that adjustment data not affected by changes in input
signal (OSD language; OSD position, input sigiul selection,
power saving delay time and the control lock function) is .
not reset to the factory settings.
RESET
Press and hold the RESET button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the fгк;toty settings.
RESET
17