Sony GDM-400PS - Manual (Page 15)

Customizing Your Monitor
Using the OPTION On-screen
Display
The OPTION OSD allows you to manually degauss the
screen and adjust settings such as the OSD position and
power saving delay time. It also allows you to lock the
controls.
ri-. r-'j if.
pisgaiissIniSi^ti^^
The monitor screen is automatically degaussed
(demagnetized) when the power.is turned on.
You can also manually degauss the. monitor.
1 Press the MENU button.
The MENU OSD appears.
MENU
2 Press the and buttons to select'
OPnON,' and press the MENU button again.
The OPTION OSD appears.
nZB
b
3 Press the buttons to select" (MANUAL
DEGAUSS).'
i
1
b
4 Press the O button.
The screen is degaussed for about 3 seconds.
Ezra
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
You can change the OSD position (for example, when you
want to adjust die picture behind the OSD).
1 Press the MENU button.
The MENU OSD appears.
2 Press the and buttons to select" i
OPTION,' and press the MENU button again.
The OPTION OSD appears.
QZD Bm
b b
3 Press the buttons to select" gg (OSD H
POSITION)'or ” O (OSD V POSITION).'
Select " gg (OSD H POSmQN)" to adjust the horizontal
position.
dZU
b
1 MIN
0-: UNLOCK
OSD H POSITION
Select " (ig (OSD V POSITION)" to adjust the vertical
position.
W
O: AUTO
S ,___ ,--------,
J3"(n H It D
-------!=!------ '
»y! UNLOCK
OSD V POSITION
4 Press the buttons to move the OSD to the
desired position.
turn
b
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button wliile the OSD is on.
15