Sony GDM-400PS - Manual (Page 12)

Customizing Your Monitor
Using the ZOOM On-screen
Display
The ZOOM settings allow you to enlarge or reduce the
picture.
Once the setting is adjusted, it will be stored in memory for
the current input signal.
1 Press the MENU button.
The MENU OSD appears.
Using the COLOR On-screen Display
You can change flie moiutor's color temperature. For
example, you can adjust or change the colors of a picture on
the screen to match the actual colms of the printed picture.
Once die setting is adjusted, it will be stored in memory for
all input signals received.
1 Press the MENU button.
The MENU OSD appears.
MENU
15
2 Press the and buttons to select “ gg
ZOOM,*' and press the MENU button again.
The ZOOM OSD appears.
____^ V
Em CZED
b b 26
73
3 Press the 34^/“^button$ to adjust the picture zoom.
Q
1
^
1 ]
?.J ... to enlarge the picture
■4>“ ... to reduce the picture b
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
Note
The picture zoom adjustment will stop as soon as either the
horizuiilal or vertical size reaches its maximum or mirumum value.
2 Press the and buttons to select "gj
COLOR," and press the MENÜ button again.
Tire COLOR OSD appears.
I ^/LtJ GI
b
im
b
SPOOK I 6sooK| . 93oeK
a 50
a 50
a so
a so
a so
D SO
R eiAsa
6 BIASO
B BIAS0
R GAM a
a CAINO
B GAIN D
3 Press the buttons to select the color
temperature.
I » 11 I
b
There are three color tempera ture modes in the OSD.
The preset adjustments are;
5000K, 6500K, 9300K
12