Sony SPP-930 - Manual (Page 18)

Speed dialing (continued)
To store the previous number dialed
Press (REDIAL) directly after step 2, then go to step 4.
To store a number to be dialed via Private Branch Exchange (PBX)
Before entering a phone number in step 3 on the previous
page, do as follows:
1
Enter the outside line access digit (e.g. 9).
2 Press and hold the number button down before the position where the
pause is to be inserted.
For example, 9, pause, 555-1234 would be programmed by pressing and
holding the 9 button until it beeps twice, then entering 5, 5, 5, 1, 2, 3, 4.
The pause is two seconds in length. To enter a longer pause, press and
hold the button down until the handset beeps three or four times. Each
additional beep indicates an additional two second pause.
Note
Each pause is counted as a digit.
To change a stored number
To store a new number, follow the instructions described on the previous
page.
Making calls with speed dialing
1
Press (TALK).
The TALK lamp lights up.
Press ( SPEED DIAL).
3
Enter the desired speed dialing number ((0) to (D).
The phone number stored in the speed dialing number will be dialed.
18^'“ Advanced Features