If the handset battery becomes weak during a call, Making calls – Sony SPP-930 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
1
2
3
Press C
TALK).
The TALK lamp lights up, then
you'll hear a dial tone. If you hear
beeps, move closer to the base unit.
Dial the phone number.
When you're done talking, press
(OFF)
or replace the handset on the
base unit.
The TALK lamp goes off.
Additional tasks
To
Do this
Select a better channel
Press
(CHANNEL).
Switch to tone dialing temporarily
Press
(
*TONE)
while using the
telephone after you're
connected. The line remains in
tone dialing until disconnected.
If the handset battery becomes weak during a call
You hear a beep and the ВАТТ LOW lamp on the handset
flashes.
The call will disconnect soon. Replace the handset on the base unit
to charge.
Notes
• Before dialing, make sure you can hear the dial tone, otherwise you cannot
dial correctly.
• When the TALK lamp lights up by pressing (TALK), the IN USE lamp on
the base unit lights up simultaneously.
14™ Basics