Sony GDM-F500 - Manual (Page 9)

Selecting the input signal
You can connect two computers to this monitor using the HD 15
and BNC connectors. To switch between the two computers, use
the INPUT button.
Automatically sizing and centering
the picture
You can easily adjust the picture to fill the screen by pressing the
\SC (auto sizing and centenng) button.
Press the INPUT button. ^
The input signal and corresponding input indicator change each
time you press this button.
Press the ASC button.
The picture automatically fills the screen.
O O
INPUT' h DIS BNC
Notes
• If no signal is input to the selected connector, the monitor automatically
switches to the other connector.
• If you restart the computer you want to view, or that computer is in
power saving mode, the monitor may automatically switch to the other
connector's signal. If this happens, manually select the desired signal
usmg the INPUT button.
Notes
• This funcuon is uitended for use with a computer mnning Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• Pictures with an aspect ratio of 5:4 (resolution: 1280 x 1024. 1800 x
1440) are displayed at their actual resolution and do not fill the screen
to the edges.
• The screen may go blank for a few seconds when the ASC button is
pressed. This is not a malfunction.
y