1 turn on the monitor and computer, 1 press the joystick, Step 3: turn on the monitor and computer – Sony GDM-F500 User Manual

Page 8: Selecting the on-screen menu language (lang)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting Universal Serial Bus
(USB) compliant peripherals

Your monitor has one upstream and four downstream USB

connectors. They provide a fast and easy way to connect USB
compliant penpheral devices (such as keyboards, mice, pnnters

and scanners) to your computer using a standardized USB cable.
To use your monitor as a hub for your peripheral devices, connect

the USBs as illustrated below.

peripheral devices

penpheral devices

1 Turn on the monitor and computer.

2 Connect your computer to the square upstream

connector using the. supplied USB cable.

For customers using Windows

If a message appears onyour screen, follow tfie on-screen instnicuons

and select Generic USB Hub as the default settmg.

3 Connect your USB compliant peripheral devices to

the rectangular downstream USB connectors.

Notes

• Not all computers and /or operaune systems suppon USB

configurations. Check your computer ' s instrucuon manual to see u you

can connect USB devices.

• In most cases, USB driver software needs to be installed on the host

computer. Refer to the penpheral device’s instrucuon manual for

further details.

• The monitor functions as a USB hub as long as the momtor ts either

“on” or in power saving mode.

• If you connect a keyboard or mouse to the USB connectors and then

boot your computer for the first time, the peripheral devices mav not

function. First connect the keyboard and mouse directly to the

computer and set up the USB compliant devices. Then connect them to

this momtor.

• Do not lean on the momtor when pluggmg in the USB cables. The

momtor may suddenly shift and cause mjury.

Selecting the on-screen menu
language (LANG)

English, French, German. Spamsh. Italian, and Japanese versions

of the on-screen menus are available. The default setting is
English.

Press the joystick

See page 11 for more information on using the joystick.

Move the joystick to highlight Q LANG and press

the joystick again.

FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO

Move the joystick up or down to select a language

and press the joystick again.

• ENGUSH

• FRANÇAIS; French

• DEUTSCH: German

• ESPAÑOL: Spamsh

• ITALIANO: Italian

• S:$:g: Japanese

To close the menu

Press the joystick once to remm to the

mam

menu, and twice to return to

normal viewing. If no buttons are pressed, the menu closes automatically

after about 30 seconds.

To reset to English

Press-the RESET button while the LANGUAGE menu is displayed on the