Sony GDM-F500 - Manual (Page 18)

Seif-diagnosis function
This monitor IS equipped with a seif-diagnosis function. If there is
a problem with your monitor or computerfs), the screen will go
blank and the Cl) (power) indicator will either light up green or
flash orange. If the Ci) (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
Ci) (power) indicator
If the (!) (power) indicator is green
1 Remove any plugs from the video input 1 and 2
connectors, or turn off the connected compútelas).
2 Press the (!) (power) button to turn the monitor off
and on.
3 Move the joystick to the right for 2 seconds before
the monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computert s).
If the color bars do not appear, there is a potential momtor failure.
Inform your authonzed Sony dealer of the momtor's condition.
If the (!) (power) indicator is flashing orange
Press the (!) (power) button to turn the monitor off and
on.
If the (!) (power) indicator lights up green, the monitor ts working
properly.
If the (!) (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the (!) (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your momtor. Also note the make and
model of your computer and video board,
Specifications
CRT
Viewable image size
Resolution
Standard image area
0.22 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Approx. 403.8 X 302.2 mm (w/h)
(16 X 12 inches)
19.8" viewing image
Horizontal: Max. 1800 dots
Vertical: Max. 1440 lines
Approx. 388 X 291 nun (w/h)
(15 ^/8 X 11 ‘/2 inches)
Approx. 364 X 291 mm (w/h)
(14 ^/8 X 11 ‘/2 inches)
Deflection frequency*
AC input voltage/current
Power consumption
Dimensions
Mass
Plug and Play
Supplied accessories
Horizontal; 30 to 121 kHz
Vertical; 48 to 160 Hz
100 to 240 V, 50 - 60 Hz. 2.0 - 1 .i
Max. 160 W (with no USB device
connected)
Approx. 502 X 5 1 1 X 486.3 mm (w/I
(19 '/8 X 20 ‘/8 X 19 */4 inches)
Approx. 34 kg (74 lb 15 oz)
DDC1/DDC2B/DDC2AB/DDC21
See page 6
♦ Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of ti
horizontal time or 0.8 ps, whichever is larger.
• Horizontal blanking width should be more than 2.5 psec.
• Vertical blanking width should be more than 450 psec.
Design and specifications are subject to change without norie