Continujous shooting, Continuous shooting – Sony DSC-D700 User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select “Start” using the A(UP)/T(DOWN)
buttons and then press EXECUTE.
“WB" is displayed in the viewfinder and white
balance adjustment begins.
After the flash lights about 10 times, the WB
indicator goes off. The white balance adjustment
is complete.
The white balance value is valid until it is
adjusted again.
I
>
a
<
P)
3
o
(D
a
O
■ o
(D
“t
D)
5
‘
3
0)
5*
5
;
3'
10
fi)
T3
o
c
When the WB indicator fiashes, the white
baiance is not successfuiiy being
adjusted. Exit this mode by pressing any
operation button besides the WB button
and readjust the white baiance again.
Continujous Shooting
In this mode you can continuously shoot pictures until you reach the maximum number by keeping
the release button pressed.
1
While pressing the mode lock (green), turn the
power/mode dial to CAM.
^ Turn the LCD monitor on by pressing the LCD
button.
l»Ncite
Settings can also be confirmed on the LCD panel.
When checking the settings on the LCD panel,
this step is not necessary.
3
Turn the mode dial to DRIVE and press the shift
button.
The DRIVE menu appears.
78
GB