Changing the iso sensitivity – Sony DSC-D700 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the WB indicator disappears, white balance
adjustment is complete.
The camera is ready to take pictures.
The white balance you have chosen is valid until
you readjust it.
When the WB indicator flashes, the white
level was not successfully adjusted.
Press any other operation button to leave
this mode, then begin the white balance
adjustment process again.
Changing the ISO Sensitivity
You can the get the same effect with this mode as is achieved by using films with different ISO
sensitivities in film cameras. You can choose from ISO 100, 200 and 400.
1
While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
2
Push the LCD button to turn on the LCD monitor.
Settings can also be confirmed on the LCD panel.
When checking the settings on the LCD panel,
this step is not necessary.
Turn the mode dial to ISO and then press the shift
button.
I
>
a
<
0)
3
o
(D
a
O
■ o
(D
fi)
o'
3
(0
(0
(D
The ISO MODE menu appears.
(Q
(0
continued on next page
59
GB