Setting up the remote control, Press the code set button, Test the remote control – Sony SAT-A55 User Manual
Page 65: 0 (d (d, Other information, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Information
Setting Up the Remote Control
CD
FUNCTION
■ ■ -- TV __________________
CDCDCD i
0 (D (D
RM-Y802
Remote Control
The RM-Y139 and RM-Y802 remote controls can be programmed to
operate your other audio/video equipment.
Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on pages 66 and 67.
Press the CODE SET button.
The function indicators begin flashing.
CD CD CD
Press the 0-9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
%
Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH +/- buttons.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 3.
V
Tips
•
Remember to edm the remote control at
the device you are trying to operate.
• To control extra VTRs (VCRs), a DVD
player or an amplifier with the
RM-Y802 remote control, slide the
device switch to VTR2,3, DVD or AMP
after you have set up the remote with
the correct manufacturer code.
ty
o
l-t
3
su
O'.
o
3
65