Step 5: connecting the vcr controller, Connecting a sony smartfile^*^ vcr, Sl o – Sony SAT-A55 User Manual
Page 11: Trip
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 5: Connecting the VCR Controller
O To allow the Digital
Satellite Receiver to
control your VCR
Connect the VCRController
to the VCR CONTROL jack
on the receiver.
Connect the VCR Controller to allow the Timer & Rec feature to
automatically operate your VCR.
See "Setting Up the VCR Control Feature" on page 26 for information
about setting up the Digital Satellite Receiver to work with your VCR.
Digital Satellite Receiver
3 c
c i
^ 5
H CD
2 Q.
a 5'
SL o
tn M
S, 2
s
^
fD ^
2
<‘
a>
In front of the VCR
Place the VCR Controller under and in
front of the VCR.
The VCR Controller must extend just
in front of the infrared sensor of the
VCR.
trip
If the infrared sensor is not marked
on your VCR, shine a flashlight into
the front panel of the VCR to locate
the sensor.
0
If you are using a Sony
SmartFile VCR to take
advantage of the Program Data
Download feature
Use this connection instead of the
VCR Controller connection. For
information about setting up the
VCR Control feature, see page 26.
For details about the Program Data
Download feature, refer to your
SmartFile VCR Operating
Instructions.
Connecting a Sony SmartFile^*^ VCR
Digital Satellite Receiver
0
11