Step 4: adding a vcr and audio system, 9' tip, V'tip – Sony SAT-A55 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 4: Adding a VCR and Audio System
You can record programs by adding a VCR. You can also connect your
Digital Satellite Receiver to an audio system for enhanced sound
enjoyment.
Audio Receiver
r-a-Cl
Optical Cable
(SAT-A55 only)
(optional Sony
accessory POC-15A)
0 If you have a
digital or Dolby
Digital audio
system (SAT-A55
only)
Connect the
DIGITAL OUT
(OPTICAL) of the
Digital Satellite
Receiver to the
optical digital
input of your audio
system.
'9' Tip
If you connect your
Digital Satellite
Receiver to a Dolby
Digital receiver, set
the Dolby Digital
option of the Audio
display to Auto
Select. See "Setting
Audio Options
(AUDIO)" on page
64 for more
information.
© if your TV and VCR have A/V
jacks
Cormect the VIDEO OUT jacks of
your Digital Satellite Receiver to
the A/V input jacks of your VCR
using the supplied A/V cable.
Theiv connect the A/V output
jacks of your VCR to the A/V
input jacks of your TV using an
A/V
cable. (Be sure to match the
colors on the jacks with the
colored plugs on the A/V cable.'
© If your TV and VCR have
S-Video jacks
Use rm S-Video cable instead of
the yellow video coimection.
S-Video cable is supplied with
the SAT-A55 model and is an
optional accessory with the
SAT-B55 model.
V'Tip
To allow your Digital Satellite
Receiver to control the recording
functions of your VCR, see "Step
5; Cormecting the VCR
Controller" on page 11.
© If you have a stereo
or Dolby® Pro Logic®
audio system
Connect the upper
AUDIO R and L(MONO)
jacks on the Digital
Satellite Receiver to the
audio inputs of your
stereo amplifier.
yapTiCAj.
1 M
VHmjHF
SVD60
VO60
IfMONOt
■4UOO-
R
If your TV and VCR do
not have A/V jacks
Cormect the VHF(SAT)/
UHF OUT jack on the
Digital Satellite Receiver to
the VHF/UHF input jack
on your VCR using coaxial
cable.
Then, connect the VHP /
UHF output jack on your
VCR to the VHF/UHF
input jack on your TV using
coaxial cable.
Set the CH3/CH4 switch to
the chaimel that does not
carry off-air broadcasts in
your area.
Note
With this connection,
your input source is
channel 3 or charmel 4
depending on how you
set the CH3/CH4 switch
on your VCR.
10