Harbor Freight Tools IMPACT SET 33567 - Manual (Page 2)

SPECIFICATIONS
RATCHET WRENCH —
Average Air Consumption 4 CFM
Recommended Air Pressure 90 PSI
Air Inlet ¼” NPT
Free Speed 150 RPM
Maximum Torque (ft. lbs.) 45
IMPACT WRENCH —
Bolt Capacity 1/2"
Speed 7000 RPM
Air Inlet ¼” NPT
Sockets 7/16" – 1"
Maximum Torque (ft. lbs.) 230
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep
both this manual and your invoice in a safe, dry place for future reference.
SAFETY WARNING & CAUTIONS
WARNING: When using pneumatic equipment, basic safety precautions should always be
followed to reduce the risk of personal injury and hazards due to over pressurization. READ ALL
INSTRUCTIONS BEFORE USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit loca-
tions. Don’t expose to rain. Keep work area well lit. Do not use electrically powered air
compressors in the presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them
handle machines, tools, or hoses. Keep others a safe distance from tool while tool is in
operation as accidental actuation may occur, possibly causing injury.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s
capacities.
Page #2 -- SKU: 33567 REV 12/02 REV 05/04
For technical questions, please call 1-800-444-3353.