If the remote commander doesn't seem to be, Working, If the remote commander is working properly – Sony RM-Y130 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 3: Checking If the Code Number Works

Aim the Remote Commander at the
component and press the

POWER

button that corresponds to your
component. The component should

turn on.

--------- POWER-

CABLE TV

CDCD

POWER

When the component turns on.

check that the Remote Commander
is operating the other functions of
your component. Press the

CH +/-

'Wj

buttons.

PAGE^

if the Remote Commander Doesn't Seem to Be
Working ...

■ First, try repeating these setup procedures using the other

codes listed for your component (see page 16).

■ If — after trying all the codes listed for your component —

you still cannot get the Remote Commander to work
properly, try the learning function described under "Setting
Up a Non-preprogrammed Component" on page 9.

If the Remote Commander is Working Properly ...

■ You're finished setting up the Remote Commander for this

component.

■ You'll need to complete these procedures for each

component you plan to use with the Remote Commander.