Using the remote commander, Setting up the remote commander, Before operating a component – Sony RM-Y130 User Manual
Page 11: Operating a component 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Remote Commander
Before Operating a Component
Press the
FUNCTION
button that
corresponds to the component you
function
-
cable
want to operate
(DSS
to operate a
DSS receiver,
TV
to operate a TV,
CABLE
to operate a cable box). For
VCR or MDP operation, open the lid
of the Remote Commander and set
the
slide switch
to the position you
set for your component when setting
the code number.
VTR1 2 3MDP
Operating a Component
1
Press the
POWER
button that corresponds to the
component you want to operate
(DSS
to turn on a DSS
receiver,
TV
to turn on a TV,
CABLE
to turn on a cable box,
POWER
inside the lid to operate a VCR or MDP).
2
Point the Remote Commander directly at the component.
3
Press the button for the function you want to use.
See "Remote Commander Button Descriptions" on page 12
for complete descriptions of the buttons on the Remote
Commander’^.
* Some buttons on the Remote Commander work exclusively
with specific components. Several buttons also function in
any component operation mode. For example, you can use
the TV/ VTR button to control the VCR even if any
FUNCTION button is pressed. For a complete list of the
buttons that work independently, see the highlighted
"buttons in the tables on the following pages.
11