Setting the code, Step 1; entering the remote commander's id code – Sony RM-Y130 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Code
step 1; Entering the Remote Commander's ID
Code
In addition to having infrared transmission, this Remote
Commander includes RF transmission, which allows you to
control your Sony brand DSS receiver from another room if
your component supports RF remote control. However, your
Remote Commander may be interfered with by the same type
of Remote Commander that is used nearby. To prevent this,
set the Commander's ID code. For the procedure of setting
your ID code, see the instruction manual of your DSS receiver.
Step 2: Entering the Code Number for Your
Component
1
Turn off fhe component you want to set up.
2
Turn to "Component Code Numbers" on page 16, and find
fhe three-digif code number for your component.
If more than one code number is listed, use the number
that's listed first to complete the steps that follow.
For example, if you're
setting up a Philips VCR,
you would use code
number 310.
Brand
Component
Code No.
Philips
VCR
310, 308, 309
If your component is not listed, see "Setting Up a Non-
preprogrammed Component" on page 9.