Two Brothers Racing Triumph Sprint ST 1050 - Manual (Page 3)

005-1540420V
Qty. Description Part Number
1 M-5 Titanium Muffler Canister 005-120420M
1 Stainless Steel S-Bend Slip-On Tube 005-15501S
1 HARDWARE KIT 005-154-3
1 X-Lite™ V.A.L.E.™Retaining Ring 005-7-2-2
1 Licence Plate Bracket 005-17304B
1 Rear LED Tail Light /Plate Lights 005-17504LK
1 Turn Signal Marker Lights (Set of 2) 005-88T2
1 C-5/M-5 Oval Muffler Clamp Halves (set 2) 005-5C-6A
2 8x20mm Socket Head Cap Screw 005-SH820
4 M6 Split Lock Washer 005-WL6
1 Muffler Hanger Bracket LEFT 005-154-13L
1 Muffler Hanger Bracket RIGHT 005-154-13R
4 6x14mm Socket Head Cap Screw 005-SH614
2 8mm Nylon Insert Lock Nut 005-NN8
1 5mm Long Handle Ball end hex key 005-9-18610
005-1540419V
Qty. Description Part Number
1 M-5 Carbon Fiber Muffler Canister 005-120419M
1 Stainless Steel S-Bend Slip-On Tube 005-15501S
1 HARDWARE KIT 005-154-3
1 X-Lite™ V.A.L.E.™Retaining Ring 005-7-2-2
1 Licence Plate Bracket 005-17304B
1 Rear LED Tail Light /Plate Lights 005-17504LK
1 Turn Signal Marker Lights (Set of 2) 005-88T2
1 C-5/M-5 Oval Muffler Clamp Halves (set 2) 005-5C-6A
2 8x20mm Socket Head Cap Screw 005-SH820
4 M6 Split Lock Washer 005-WL6
1 Muffler Hanger Bracket LEFT 005-154-13L
1 Muffler Hanger Bracket RIGHT 005-154-13R
4 6x14mm Socket Head Cap Screw 005-SH614
2 8mm Nylon Insert Lock Nut 005-NN8
1 5mm Long Handle Ball end hex key 005-9-18610
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft,
clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the
bright finish to factory spec.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always
apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Repack all road canisters at the first signs of packing material deterioration. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the
intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.
Warranty
two brothers racing products are intended for closed course competition purposes only, and
therefore are sold “as is” without warranty. two brothers racing specifically disclaims any
warranties of merchantability or fitness for a particular purpose and disclaims all responsibil-
ity for consequential and incidental damages or any other losses arising from the use of these
products or parts.