Two Brothers Racing Ducati Monster 696 - Manual

6. Install left muffler using the OEM hardware and springs.
7. Install right muffler using the OEM hardware and springs.
8. Adjust muffler alignment.
9. Tighten the 8 X-Ring bolts.
10. Tighten muffler mounting bolts.
11. Double check all your work.
12. Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Also,
remove any plastic film from the name badge(s) and or
canister clamp(s). Run the bike and enjoy. It is normal for
some white smoke to appear the first time you start the
bike. This is packing/manufacturing oil from inside the
pipe burning off. Check for gaps or leaks. If you find a leak,
a little high temperature silicon sealant should fix it. After
50 to 100 miles, recheck all fasteners for tightness.
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
2. Remove muffler joint pipe springs.
3. Remove muffler mounting bolts.
4. Remove left and right mufflers.
5. Install TBR slip-on tubes to mufflers by attaching the
X-Ring to the mufflers using the 6x14mm socket head cap
screws and lock washers provided. Leave loose for now.
Qty. Description Part Number
2 Muffler Canister Varies
1 Slip-on Tube left 005-24904L
1 Slip-on Tube right 005-24904R
1 HARDWARE KIT 005-249-3
2 X-Ring Kit 005-7-2-3KIT
1 TBR Sticker Kit 015-10212
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Continued on pg. 2
2009 Ducati
Monster 696
V.A.L.E.™ Dual Slip-on Exhaust System with M-2 Canisters
Part # 005-2490406DV, 005-2490407DV, 005-2490408DV
Parts List
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as
is” without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for
a particular purpose and disclaims all responsibility for consequential and incidental damages or any other losses
arising from the use of these products or parts.