Two Brothers Racing Polaris Ranger RZR800 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
IMPORTANT - PLEASE READ CAREFULLY
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
Installation Instructions
2011 Polaris
RangeR RZR 800
V.A.L.E.™ Triple Full Exhaust System with M-7 Aluminum Canister
Part # 005-3010106TV
1. Make sure the quad is completely cool before starting the
installation. Make sure the quad is secure on a level surface
and the wheels are chocked to prevent the quad from rolling.
2. Remove the rear bed assembly:
- Remove the seats.
- Remove the screws (4) behind the seats.
- Remove the screws (4) around the tail pipe.
- Remove the bolts (4) in the bed and 2 tiedown hooks.
- Remove 3 screws and 1 push pin per side.
- Unplug lights from wire harness (1) under drivers side
of bed.
- Carefully lift bed assembly off.
3. Remove OEM muffler and mid-pipe (you may need to
temporarily remove heat sheild and bed rest):
- Loosen OEM clamp.
- Remove header joint springs.
- Remove mid-pipe tension springs.
- Remove mid-pipe.
- Remove muffler assembly.
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Be sure
to save all stock components for possible use later.
**This product has not been tested with all available accessories and some
items may cause excessive heat. Excessive heat may cause damage to your
vehicle. Two Brothers Racing will not be responsible for damaged parts.