Tri-Tronics Tactical 500 G3 - Manual (Page 52)

48 www.tritronics.com
Beeper Problem #3. The Beeper sound quality has become muffled or distorted.
Dirt or debris has become trapped in the horn. Remove trapped debris as described in the
“Care and Maintenance” on page 39.
Beeper Problem #4. The Beeper light is blinking but the Beeper isn’t working.
• The Beeper battery is getting low. Replace the Lithium CR123A battery.
• The Beeper has been switched off remotely. Switch it back on.
Beeper Problem #5. The Beeper is switching itself off or operating the locate feature
without receiving a signal from the Transmitter.
There is a radio frequency interference. Move to another area.