Tri-Tronics Tactical 500 G3 - Manual (Page 36)

32 www.tritronics.com
TRI-TRONICS UPLAND G3 BEEPER
The Tri-Tronics Upland G3
® Beeper is a breakthrough in modern beeper technology, featuring a simple 1-button design with
an impressive audible range of over 1/4 MILE. Weighing less than 3 ounces, the new beeper features an extremely compact,
waterproof, and rugged design.
The Tri-Tronics Upland G3 Beeper is a product which is designed to help you locate your dog and/or determine if the dog is “on
point”. The Beeper can be part of an Upland system or a free standing product and has a wide choice of settings to suit different
hunting styles and individual preferences. 8 different Hunt and Point or Point only modes allow you to simultaneously track
several individual dogs.
Your Beeper can be switched on and off from a distance using the transmitter of any Field Series or Pro Series model and the
Sport Upland G3. Therefore, you can leave the Beeper off most of the time, and only switch it on when required by hunting
conditions.
If you purchased a Sport Upland G3 or Upland Special G3 your transmitter has one button
specifically for switching the Beeper on and off. If you purchased any other Field or Pro
G3 series model you can use any transmitter button to switch the Beeper on or when your
transmitter dial is set on “A.” If you purchased a Sport Basic G3 or Sport Combo G3, you
cannot switch your Beeper on or off from a distance, but your Beeper will have all other
functions, such as choice of mode, run and point tones, and volume control, as described in
this owner’s guide.
Battery
One 3-volt battery (CR123) is already installed in your beeper.
See “Replacing the Beeper Battery” on page 38 of this manual for
instructions about when the battery needs replacement and how to replace it.