Tri-Tronics Tactical 500 G3 - Manual (Page 41)

37 www.tritronics.com
HUNT MODE - Red LED Light
You may select one of four settings as your HUNT Mode: Single Beep, Double Beep, Triple Beep, or No Beep.
While hunting with several dogs at once, the various HUNT modes will come in handy for you to distinguish each dog.
Number of times the Red LED light blinks during selection:
• Single Beep – 1 blink of Red LED
• Triple Beep – 3 blinks of Red LED
• Double Beep – 2 blinks of Red LED
• No sound – No light
POINT MODE - Green LED Light
Select one of two settings as your POINT Mode: Hawk Scream or Single Beep.
Number of times the Green LED light blinks during selection:
• Hawk Scream – Green LED on solid, no blinking
• Single beep – 1 blink of Green LED
REMOTE OPERATION OF THE BEEPER
(Not applicable for the Sport Basic, Sport Combo, or the Sport Junior)
To remotely operate the Beeper with your Transmitter, you must first switch on both the Beeper and the Receiver. Because your
Beeper receives its signal from your collar Receiver, each device must be in close proximity to one another. The Beeper has the
same operational range as that of your remote trainer. With the sound switched off the Beeper still has power and the RED LED
light on the Beeper continues to blink.
Sport Upland G3 and Upland Special G3:
• Set the Transmitter intensity dial to a number (Not “N” or “T”)
• Quickly press and release the Beeper control button on the
Transmitter. (Top black button on the Sport Upland; Green button
on the Upland Special.)
• 1 or 2 beeps confirm “on” and “mute.”