Tri-Tronics Tactical 500 G3 - Manual (Page 38)

34 www.tritronics.com
RED and GREEN
LED Light Indicators
figure 3
AvAILABLE MODES (Sound Combinations)
The Upland G3 Beeper can operate under a variety of sound
combinations or “Modes”. These include various series of beeps
when the dog is hunting and a hawk scream or a beep when on
point.
• HUNT Mode – The Beeper sounds every 4 seconds while the
dog is moving.
• POINT Mode – The Beeper sounds once every second while
the dog is on point. The hawk scream sounds every
five seconds.
• HUNT Mode and POINT Mode can be used in eight (8)
pre-set combinations that you select and set as described
on pages 35 and 36.
• To check the current Beeper setting - First switch the
Beeper on. Gently shake the Beeper (to simulate a running dog)
and listen for the HUNT setting. Next, hold the Beeper still and
listen for the POINT setting. Your new Beeper is LOUD!
Holding your thumb over the speaker horn will lessen the sound.