Tri-Tronics Tactical 500 G3 - Manual (Page 40)

36 www.tritronics.com
Mode Setting Cycle
As you cycle through the settings, 1-8, the order will occur as follows:
To SAvE your selection:
• Press and hold the Power/Mode Select button until both LED lights flash three (3) times together
then release the button. The Beeper will now operate in the Modes you have selected.
SETTING
#
POINT Mode
(Green LED)
HUNT Mode
(Red LED)
1 Solid (Hawk Scream) 1 blink (1 Beep)
2 Solid (Hawk Scream) 2 blinks (2 Beeps)
3 Solid (Hawk Scream) 3 blinks (3 Beeps)
4 Solid (Hawk Scream) No light (No Beep)
5 Blinking (1 Beep) 1 blink (1 Beep)
6 Blinking (1 Beep) 2 blinks (2 Beeps)
7 Blinking (1 Beep) 3 blinks (3 Beeps)
8 Blinking (1 Beep) No light (No Beep)