Citizen Systems Model CMP-10 - Manual (Page 25)

— 23 —
ESC @
[Function] Initializing the Printer
[Code] <1B>H<40>H
[Outline] Clears data stored in the print buffer and brings various settings to the initial state
(Default state). Items not cleared are as shown below.
• Data inside the internal input buffer are not cleared.
• Does not clear any data in the internal input buffer.
• Does not clear downloaded characters.
• Does not clear defined downloaded characters.
• Does not clear defined downloaded bit image.
• Does not clear defined macro.
• Does not clear setting for print density.
• Does not clear baud rate setting of serial port.
• Does not clear valid/invalid setting for panel switch.
• Does not clear ASB mode setting.
• Does not clear setting for auto power-off time.
• Does not clear memory switch.
[Caution] At power off, the following settings are cleared in addition to the items cleared by
this command.
• Clears input buffer.
• Clears macro.
• Return ASB mode according to the memory switch setting.
• Clears valid/invalid setting for panel switch.
[Sample Program]
PRINT #1, CHR$ (&H1B) + “ ! “ + CHR$ (&H30) ;
PRINT #1, CHR$ (&H1B) + “V” + CHR$ (1);
PRINT #1, “AAA” + CHR$ (&HA);
PRINT #1, CHR$ (&H1B) + “@”;
PRINT #1, “AAA” + CHR$ (&HA);
[Print Results]
A A A
A A A