Citizen Systems Model CMP-10 - Manual (Page 22)

— 20 —
A A A A A A A A A A
a a a a a
ESC = n
[Function] Data Input Control
[Code] <1B>H<3D>H
[Range] {0 =< n =< FF(Hex)}
[Outline] Selecting equipment in which data input from the host is effective.
• Each bit of n indicates as follows:
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
[Caution] • Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command.
[Default] The initial value of n is “1”.
[Sample Program]
PRINT #1, “AAAAA”;
PRINT #1, CHR$ (&H1B) + “=” + CHR$ (0);
PRINT #1, “aaaaa” + CHR$ (&HA);
PRINT #1, CHR$ (&H1B) + “=” + CHR$ (1);
PRINT #1, “AAAAA” + CHR$ (&HA);
[Print Results]
Value
0 1
0 Printer Invalid Valid
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
Bit Equipment
>