Tomei Powered ARMS M7760 Twin Scroll - Manual (Page 7)

- 7 -
Kit Contents
The following items illustrated below are the items included in the kit. Item Quantity is noted in ( ).
Turbine Unit (1) Water Pipe A (1) Water Pipe Ｂ （１） Oil Return Pipe (1)
Eye Bolt
Large Gasket (4)
Eye Bolt
Small Gasket (2)
Oil Return Pipe
Gasket (1)
Gasket A (1) Gasket B (1)
Bolt (2) Stud Bolt (3) Nut (3)
Large Eye Bolt (2) Small Eye Bolt (1)
Required Tools
・Manufacturers Service Manual ・Torque Wrench
CAUTION
■ This manual is for the instructions on the removal and re-installation of this turbo kit. You will need to have the official service
manual (from Fuji Heavy Industries) for your car for additional reference on the disassembly and reassembly of other related parts.
■ This product is designed to be used for off road competition purposes. This product may not be road legal in your country so
please check with your local authorities prior to use on general public roads.
■ This product will increase your engines power output so it is necessary to address and upgrade your suspension and brakes to suit
the increased power for added safety.
■ This product was specifically designed for the vehicle application as stated above. This is not designed and may not be suitable for
other cars/engines other than stated in this manual. If this product/kit is installed on any other vehicles/engines it may damage
this product and /or the engine /vehicle that it is fitted to.
■ This installation manual simply explains the removal and installation of the turbo unit as well as the air pipe(s), heat shield and the
coolant as well. Please read this manual carefully in advance to prepare all the necessary tools required for the job.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ Protective equipment may be required for the installation process so please ensure there is the appropriate safety and 1 aid
st
equipment readily available for the installation.
■ It is best to work on the car when the engine is cold as it will prevent possible burns and or injuries when the engine is hot.
■ When removing and re-fitting the parts please perform the job with care. Do not use excessive force on the bolts and parts so as
not to cause any damages to the parts and/or related parts.
■ Please tighten each bolt with a torque wrench.
This will prevent any possible damages to the bolt and also ensure that it won’t come undone.
■ Prior to testing the car please check for adequate levels of coolant and any signs of leakage.
If there are signs of lack of coolant, leaks and/or rapid rising of temperature stop the car immediately so as not to risk engine damage.