Tomei Powered STRENGTHENED TIMING BELT - Manual (Page 3)

CAUTION
■ This product is to be fitted with the correct tools, protective & safety equipment.
Failure to do so can lead to possible work hazards.
■ Install the product as illustrated in the official workshop service manual as specified by the vehicles manufacture.
■ This product was specifically designed for the vehicle application as stated above. This is not designed and may
not be suitable for other cars/engines other than stated in this manual. If this product/kit is installed on any other
vehicles/engines it may damage this product and /or the engine /vehicle that it is fitted to.
■ Do not use this product on engines that are mounted with a solid engine mounts (instead of bush engine mounts).
SPECIFICATIONS
High saturation H-NBR
(* EJ20 is a High Saturation H-NBR + Nylon Micro Fiber.)
High Strength Glass Core Fibers
Kevlar + Nylon Fibers
LONGEVITY RATIO
Lifespan 3-4x Longer
Heat Resistance 2-3x Longer
Rib Lift 3-4x Longer (EJ20 11x Longer)
Frictional Wear 2-3x Longer
TEETH Nylon Fiber
STOCK BELT ＴＯＭＥＩ
CORE Glass Core Fibers
RUBBER Standard H-NBR
3 3