Taylor-Wharton Microbulk Tanks - Manual (Page 17)

TW-407 Rev.-
15
Handling
The MICRO BULK should be handled only by a forklift or crane. En-
sure that handling equipment has adequate rated capacity for the
system weight listed on the specification page. The MICRO BULK
is a rugged product intended for years of industrial use. Howev-
er, take care when moving the unit. Abuse (dropping or care-
less handling by forklift) may affect the integrity of the insulation
system or damage piping. Always transport, operate, and store
the unit in the vertical position. Never place the unit on its side.
Important: When lifting by crane, use the lift-eyes provided on
the top of the jacket. Never lift the unit overhead.
INSTALLATION