Reizen RE-50 Amplified Telephone - Manual (Page 24)

24
ADVANCED USER OPTIONS MENU
LCD Contrast
1. Press MENU until
-3- and "LCD CONTRAST" appear. -3- flashes.
2. Use the dial pad to key in the value or press to increase the setting,
to decrease the setting. Note: The phone has five (1-5) display contrast settings.
3. Press OK or MENU to complete the setting and go to next setting, or press
DELETE to complete the setting and return to standby mode, or you can do nothing
and wait for 15 seconds to complete the setting and return to standby mode. The
default LCD CONTRAST setting is 3.
Time/Date
Follow these steps so the phone can record the correct time and date of each call
record. Note: If you do not complete each step within 15 seconds, the phone exits
setup. Start again at Step 1.
1. Repeatedly press MENU button until "SET TIME/DATE" appears and the hour
flashing.
2. Use the keypad to key in the value or press to increase the setting, to
decrease the setting. Press or to choose AM, PM.
3. Press OK to move between the different settings. The default time/date setting is
12:00 am 01/01(hh:mm mm/dd). The local clock will also be updated automatically
when a Caller ID message is received.
4. Press OK or MENU to complete the setting and go to next setting, or press
DELETE to fail the setting and return to standby mode, or you can do nothing and
wait for 15 seconds to fail the setting and return to standby mode.
Call Wait ID On/Off
1. Repeatedly press MENU until
"CALL WAIT ID ON" appears.
2. Press or to choose CALL WAIT ID ON/OFF.
3. Press OK or MENU to complete the setting, or press DELETE to complete the
setting and return to standby mode, or you can do nothing and wait for 15 seconds to
complete the setting and return to standby mode.
NOTE: The default CALL WAIT ID setting is OFF.
Resetting The Phone
If your phone stops working properly, use a straightened paper clip to press and hold
RESET on the back of the phone for 5 sec. to reset the phone.