Reizen RE-50 Amplified Telephone - Manual (Page 21)

21
CALLER ID/MEMORY
You must store your home area code for Callback to work correctly. If the call came
from your home area code, the display shows only the seven-digit number (without
an area code). Follow these steps to dial a phone number from Caller ID records.
1. Repeatedly press or to select the desired phone number.
2. Then, repeatedly press OK to select the suitable dialing pattern for that phone
number.
To callback a phone number from the Caller ID records
with the speakerphone, press DIAL. Then, after the
phone dials the number, SPEAKERPHONE appears
(figure 33), and the phone starts to count the time.
Display Information
Call Display Messages
PRIVATE on the screen means;
• The caller has chosen to block their number
• A call from an old type of telephone network exchange
• A call from a silent number subscriber
• A call from any analogue cellular mobile telephone
OUT OF AREA on the screen means;
• A call coming from overseas
MESSAGE WAITING ON/OFF on the screen means if you subscribe to your phone
company's voice message service, your phone informs you when you have a
message waiting. If "MSG WAITING ON" is active and a appears and the new
call LED on your phone is flashing, you have a voice message in your mailbox. MSG
WAITING ON disappears from the display after 8 seconds, but the and the new
call LED flash until you retrieve the message.
NOTE: A STUTTER DIAL TONE can be used. The switch is located underneath the
phone. The message waiting feature does not work with stutter dial tone service.
There may be a delay in these indicators turning on or off. In certain circumstances,
your phone may already been in use, resulting in a delay until the VMWI message is
re-sent. Please contact your phone company for more info.
TOLL on the screen means if your phone company sends information indicating that
the incoming call is long distance, the phrase TOLL will appear on the display
Figure 33