Reizen RE-50 Amplified Telephone - Manual (Page 11)

11
AMPLIFICATION FEATURES
Incoming Voice Volume
You can adjust the volume of incoming calls by simply
sliding the VOL control (figure 12). This gives you up to
18 dB. If you want more amplification, follow the directions
below.
1. While using the handset, press AMPLIFY (figure 14) to turn
the incoming voice amplifier on or off. When amplifier is on, the
))) icon appears and AMPLIFY LED comes on.
2. Adjust the volume in the earpiece by moving the VOL slide
control. With the amplifier on, incoming volume will be up to
43 dB louder. In standard use, the amplifier turns off whenever
you hang up the telephone. This is a useful feature if many
people use the phone. If you want the amplifier to always remain
on, slide the AUTO/MANUAL switch (figure 13) underneath the
phone to AUTO.
NOTE: The amplifier will turn off when you switch to Speakerphone mode
Incoming Voice Tone
The product provides extra amplification at the sound
frequency you need to boost. To the sound frequency range
that best suits your need, follow these steps:
1. When using the handset while speaking with someone,
press AMPLIFY (figure 14).
2. Adjust the TONE slide control to suit you hearing.
Figure 12
Figure 14
Figure 13