Reizen RE-50 Amplified Telephone - Manual (Page 16)

16
MEMORY OPERATION
Deleting a Speed Dial Number
1. During one-touch emergency or MEMORY review.
2. Press DELETE (Display shows DELETE?)
3. Press the DELETE or OK
4. The phone beeps and the display shows
DELETED.
Deleting All Memory Entry
1. Press MEMORY (Display shows ITEM -XX-)
2. Press DELETE (Display shows CLEAR MEMORY?)
3. Press DELETE or OK to confirm your choice and the phone beeps and the display
shows
DELETED.
Redial
If you want to redial the last number dialed:
Method 1: Press R/P and the display will show the latest dialed number. Then press
the DIAL; the telephone will redial the last number dialed (the phone enters
speakerphone mode and dials the displayed number). Method 2: Pick up the handset
or press SPEAKER. Press R/P, the telephone will redial the last number dialed.
NOTES: The redial memory stores the first 32 digits of any number dialed. If the
number you dialed exceeds 32 digits, the redial memory will store the first 32 digits
only.
Assuming you subscribe to a Caller ID service, the time and date will be automatically
updated when the first call is received.
If you do not subscribe to a Caller ID service, or you wish to set the
TIME/DATE: (see section on time/date). When you plug the phone in, the phone
will beep and the display will show SET TIME /DATE. After 10 seconds the display
will show the number of calls received MISSED -00- & ANSWER -00- (figure 26)
NOTE: If the telephone line is being used by another phone, the display on your
RE-435 will show
EXTENSION USE. (figure 27)
Figure 26 Figure 27