Char-Broil 463741209 - Manual (Page 22)

10
7mm
Fiber Washer
Qty. 4
5mm
Fiber Washer
Qty. 2
#10-24
Wing Nut
Qty. 2
Lid
Handle
Upper lid hinge
22
Center flat portion
of hinge on bottom.
Lower lid
hinge
Insulation Washer
Qty. 2
1/4-20x1/2”
Machine Screw
Qty. 4
Attach lower lid hinges to back of firebox using two
1/4-20x1/2” machine screws, 7mm ID, 16mm OD fiber washers, and
1/4-20 Flange nuts per hinge. The center flat portion of the hinge should be at the bottom (see inset below).
Attach handle to front of lid using two
insulation washers, fiber washers and #10-24 wing nuts. Attach upper lid hinges to
back of lid using two
1/4-20x1/2” machine screws, 7mm ID, 16mm OD fiber washers, and 1/4-20 flange nuts per hinge.
Hinges should curve downward when properly installed.
11
1/4-20x1/2”
Machine Screw
Qty. 4
1/4-20
Flange Nut
Qty. 4
7mm
Fiber Washer
Qty. 4
7mm ID, 16mm OD
Fiber Washer
Insulation Washer
1/4-20
Flange Nut
Qty. 4
5mm ID, 16mm OD
Fiber Washers