Dell Latitude D500 - Manual (Page 88)

to be in the "in" position before you insert the card.
2. Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program
tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the PC Card.
Removing a PC Card or Blank
NOTICE: Before you remove a PC Card from the computer, click the icon on the taskbar to select a card and stop
it from functioning. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject
a card by pulling its cable, if one is attached.
1. Press the eject button.
1 eject button
2. Push the eject button a second time.
3. Gently remove the card or blank.