Dell Latitude D500 - Manual (Page 46)

6. Plug the two RCA connectors on the other end of the audio cable in to the audio input connectors on your television or
audio device.
Enabling the Display Settings for a Television
Intel UMA Integrated Video Controller
NOTE: Ensure that you properly connect the television before you enable the display settings.
1. Open the Control Panel window.
In Microsoft® Windows® XP, click the Start button and click the Control Panel icon. Under Pick a Category, click
Appearance and Themes.
In Windows 2000, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Display icon, click the Settings tab, and then click Advanced.
3. Click the Intel (R) Extreme Graphics tab.
4. Click the Graphic Properties button.
5. If you want to use only a television without using the computer display or any other display options:
a. In the new window, click Television so that a red check mark appears over the television icon.
b. Ensure that the settings are correct.
6. If you want to use a television and the computer display at the same time:
a. In the new window, click Intel (R) Dual Display Clone and ensure that one of the devices listed is a television.
b. Click Device Settings.
c. In the new window, ensure that the display resolution settings are correct.
7. Click Apply to view the new settings.