Dell PowerEdge SC1425 - Manual (Page 4)

Table A-2. System Board Connectors
Riser Board Connectors
See Figure A -4 for the location and description of the riser card connectors.
Figure A-4. Standard PCI-X Riser Card
Disabling a Forgotten Password
The system's software security features include a system password and a setup password, which are discussed in detail in "Using the System Setup Program"
in your User's Guide. The password jumper enables these password features or disables them and clears any password(s) currently in use.
Connector Description
BATTERY Connector for the 3.0 V coin battery
CP_CONN Control panel connector
DIMMn_ x Memory module connector (6)
FAN_n FAN1 is the connector for the expansion card fan module, and FAN2-5 is the connector for the processor and memory fan modules (4)
IDE1 IDE device connector
PROC_n Processor connector (2)
PWR_CONNn Power supply connector (2)
SATA_n SATA device connectors
USB_HEADER FRONT USB device connector
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.