Dell 2145cn Multifunction Color Laser Printer - Manual (Page 35)

Copying | 35
SETTING COPY TIMEOUT
You can set the time the printer waits before it restores the default copy settings,
if you do not start copying after changing them on the control panel.
1. Press Menu (
) until System Setup appears on the bottom line of the
display and press OK.
2. Press OK when Machine Setup appears.
3. Press the left/right arrow until Timeout appears and press OK.
4. Press the left/right arrow until the time setting you want appears.
Selecting Off means that the printer does not restore the default settings
until you press Black Start (
) or Color Start ( ) to begin copying,
or Stop/Clear ( ) to cancel.
5. Press OK to save your selection.
6. Press Stop/Clear (
) to return to Ready mode.